- Ποιότητα και μεταβλητότητα ξύλου ελληνικών φυσικών δασών, και δασικών φυτειών
- Ποιοτικοί έλεγχοι σε ποικίλα προϊόντα επίπλων και ξυλοκατασκευών (πρότυπες μελέτες)
- Διάκριση ανώριμου και ώριμου ξύλου ελληνικών δασικών ειδών
- Αναγνώριση αρχαίου ξύλου από ταφικούς τύμβους
- Μελέτη ιδιοτήτων ξύλου εμποτισμένου με φυτικά έλαια
- Δημιουργία software πρόβλεψης των ιδιοτήτων προϊόντων συσκευασίας από κυματοειδές χαρτόνι για τις Ευρωπαϊκές μικρομεσαίες επιχειρήσεις χάρτινης συσκευασίας
- Χημική και θερμική τροποποίηση ελληνικών και τροπικών ξύλων: ανάπτυξη μεθόδων και ιδιότητες ξύλου
- Συνεργασία και συνέργεια με εταιρεία R&D για την ανάπτυξη νέων νανοσκευασμάτων για την προστασία του ξύλου έναντι μυκήτων και υγρασίας (σε εξέλιξη)
- Βελτίωση της διαπερατότητας δύσκολων στον εμποτισμό ελληνικών ξύλων με τεχνική laser (σε εξέλιξη)
- Ανάπτυξη μεθόδων εμποτισμού ελληνικών ξύλων με φυτικά έλαια για παραγωγή προϊόντων προστιθέμενης αξίας (σε εξέλιξη)
- Συμπεριφορά προϊόντων ξύλου ολλανδικής εταιρείας μετά από έκθεση στο περιβάλλον (σε εξέλιξη)
- Ανάπτυξη και αξιολόγηση προϊόντων από ανακυκλωμένο ξύλο και λάστιχο (σε εξέλιξη)
- Δημιουργία software πρόβλεψης των ιδιοτήτων χαρτιών συσκευασίας για τις Ελληνικές επιχειρήσεις ανακυκλωμένου χαρτιού (σε εξέλιξη)
- Δημιουργία software για κλάσεις μηχανικής αντοχής, από κατηγοριοποίηση ιδιοτήτων ξύλου ελληνικής ελάτης και μαύρης πεύκης σύμφωνα με την έγκριτη μέθοδο Timber Grader MTG (σε εξέλιξη)
- Βελτίωση των ιδιοτήτων των ανακυκλωμένων πρώτων υλών (ίνες) μέσω χημικής τροποποίησης για τις Ευρωπαϊκές μικρομεσαίες επιχειρήσεις χαρτιού (σε εξέλιξη)
- Συμπεριφορά προϊόντων decks νορβηγικής εταιρείας μετά από έκθεση εξωτερικά (σε εξέλιξη).
Διεθνείς συνεργασίες με πανεπιστήμια / εταιρείες (έως έτος 2013)
1. Συμμετοχή στις Ευρωπαϊκές Δράσεις COST: Ε31 – Management of waste wood, E34 – Bonding of Timber, E49 – Glued wood products, E48 - The Limits of Paper Recycling (2006-2009), FP0904 - Thermo-Hydro-Mechanical Wood Behaviour and Processing, FP1003 - Impact of Renewable Materials in Packaging for Sustainability - Development of Renewable Fibre and Bio-Based Materials for New Packaging Applications, FP1004 – Enhance mechanical properties of engineering wood products & timber structures, FP1006 – Bringing new functions to wood through Surface Modification.
2. Μέλος της Διεθνούς Εταιρείας Ανατόμων Ξύλου IAWA (International Association of Wood Anatomists).
3. Ενεργές συνεργασίες με: University of Goettingen, University of Goettingen, Dept. of Wood Biology and Wood protection (Germany)- Plato International BV (Holland)- University of West Hungary, Dept. of Wood Sciences at Sopron (Hungary), AIDIMA Center of Wood and Furniture Technology (Spain)- SP Sweden, Technical Centre for Wood technology (Sweden)- Kebony ASA, (Norway)- NanoPhos S.A. (Greece, international company)- SDU University, Dept. of Forest Products Engineering (Turkey)- Chimar Hellas S.A. (Greece, international company)- NTL Chemical S.A. (Greece, international company)- Kaunas Technical University, Forest Products (Lithuania) και πολυάριθμες ελληνικές & κυπριακές παραγωγικές και εμπορικές επιχ/σεις ξύλου – επίπλου – ξυλοκατασκευών
Δημοσιευμένο ερευνητικό έργο (της τελευταίας 5ετίας)
Mantanis, G., Terzi, E., Kartal, N., Papadopoulos, A. (2014). Evaluation of mold, decay and termite resistance of pine wood treated with zinc- and copper- based nanocompounds. International Deterioration & Degradation (submitted in).
P. Gascón-Garrido, P., Oliver-Villanueva, J.V., Ibiza-Palacios, M.S., Militz, H., Mai, C. and S. Adamopoulos. 2013. Resistance of wood modified with different technologies against Mediterranean termites (Reticulitermes spp.). Biodeterioration & Biodegradation (in press).
Gortzi O., Metaxa X., Mantanis G. and S. Lalas (2013). Effect of artificial aging using eleven different wood chips on the antioxidant activity, phenolic profile, sensory properties and color of two Greek red wines. Food Chemistry 141: 2887-2895
Lykidis, C. Grigoriou Α. and I. Barboutis, 2013. Assessment of fir, fruit tree branches and evergreen hardwood schrubs wood as raw materials for particleboard. A) Mechanical properties. Wood Material Science & Engineering (in press).
Mahnert, K-C., Adamopoulos, S., Koch, G. and H. Militz. 2013. Topochemistry of heat-treated and N-methylol melamine modified wood of Koto (Pterygota macrocarpa K. Schum.) and Limba (Terminalia superba Engl. et Diels). Holzforschung 67(2): 137-146
Sint, K.M., Adamopoulos, S., Koch, G., Hapla, F. and H. Militz. 2013. Impregnation of Bombax ceiba and Bombax insigne wood with a N-methylol melamine compound. Wood Science and Technology 47(1): 43-58
Sint, K. M., Adamopoulos, S., Koch, G., Hapla, F., and H. Militz. 2013. Wood anatomy and topochemistry of Bombax ceiba L. and Bombax insigne Wall. BioResources 8(1): 530-544
Papadopoulos A.N., Mantanis G., Katsinikas, K., Michael M. (2013). Formaldehyde in indoor air of new appartments in Drama, Greece. Advances in Forestry Letter, 2(2): 9-13
Ntalos G., Karampatzakis D., Sideras A., Skarvelis M., (2012). The use of RFID technology in drying and other thermal processes of wood. 12th International IUFRO Wood Drying Conference, 30-07/03-08-12, Belém, Brazil
Adamopoulos, S., Bastani, A., Gascón-Garrido, P., Militz, H. and C. Mai. 2012. Adhesive bonding of beech wood modified with a phenol formaldehyde compound. Eur. J. Wood Prod. 70: 897-901
Kechagia E., Ntalos G., Tsanaktsis C. 2012. The usage of Posidonia oceanica for thermal energy production. International Conference “Biofuels for Sustainable Development of Southern Europe” Thessaloniki, 2012
Lykidis, C., Parnavela C., Goulounis N. and A. Grigoriou, 2012. Potential for utilizing waste corrugated paper containers into wood composites using UF and PMDI resin systems, European Journal of Wood and Wood Products Vol. 70, No 6, pp. 811–818
Voulgaridis, E., Passialis, C., Negri, M. and S. Adamopoulos. 2012. Shear bond strength of black locust with three different adhesive systems. Wood Research 57(3): 489-496
Xiao, Z., Xie, Y., Adamopoulos, S., and C. Mai. 2012. Effects of chemical modification with glutaraldehyde on the weathering performance of Scots pine sapwood. Wood Science and Technology 46(4): 749-767
Skarvelis M., Mousilopoulos K., Ntalos G. 2012. Some aspects of beech wood iscolouration during drying. 12th International IUFRO Wood Drying Conference, 30-07/03-08-2012, Belém, Brazil
Adamopoulos, S. and E. Voulgaridis. 2012. Effect of hot-water extractives on water sorption and dimensional changes of black locust wood. Wood Research 57(1): 69-78
Adamopoulos, S., Wimmer R. and E. Milios. 2012. Tracheid length – growth relationships of young Pinus brutia grown on reforestation sites. IAWA J. 33(1): 39-49
Mantanis G. and D. Jones (2012). Innovative modification of wood with nanoparticulate treatment. In: Proc. of the 6th European Conference on Wood Modification, 16/18-09-12, Slovenia.
Graikou K., Gortzi O., Mantanis G. and I. Chinou (2012). Chemical composition and biological activity of the essential oil from the wood of Pinus heldreichii Christ. var. leucodermis. European Journal of Wood and Wood Products, 70:615-620.
Adamopoulos S., Gellerich A., Mantanis G., Kalaitzi, T. and H. Militz (2012). Resistance of Pinus leucodermis heartwood and sapwood against the brown rot fungus Coniophora puteana. Wood Material Science & Engineering, 7(4):242-244.
Papadopoulos A.N. and G. Mantanis (2012). Vapour sorption studies of Belmadur wood. Advances in Forestry Letter, 1:1-6.
Sahin, T.H. and G. Mantanis (2011). Colour changes in wood surfaces modified by a nanoparticulate based treatment. Wood Research 56(4): 525-532.
Popescu, C.M., Lisa, G. and G. Mantanis (2011). Evaluation of the stage of degradation of aged Oak wood (Quercus aegilops L.) originating from the old Meteora monasteries. In: Workshop COST Action FP0802 “Micro characterisation techniques in wood mechanics”, 24/25 August 2011, Hensinki, Finland.
Μαντάνης Γ., Λυκίδης Χ. και Ε. Αθανασιάδου (2011). Προσδιορισμός της ελεύθερης φορμαλδεΰδης σε συγκολλημένα προϊόντα ξύλου: συγκριτική μελέτη των υφιστάμενων μεθόδων δοκιμών. Γεωτεχνικά Επιστημονικά Θέματα 21(2): 61-72.
Sahin, T.H. and G. Mantanis (2011). Nano-based surface treatment effects on swelling, water sorption and hardness of wood. Maderas. Ciencia y tecnologia 13(1): 41-48.
Adamopoulos, S., Chavenetidou, M. and C. Passialis. 2011. Span-to-depth ratio for shear free deformations in static bending of small wood specimens. Wood Research 56(3): 429-434
Adamopoulos, S., Karageorgos, A., Passialis, C. and M. Chavenetidou. 2011. Mathematical approach for defining juvenile-mature wood transition zone in black locust and chestnut. Wood and Fiber Science 43(3): 336-342
Adamopoulos, S., Xie, Y. and H. Militz. 2011. Distribution of blue stain in untreated and DMDHEU treated Scots pine sapwood panels after six years of outdoor weathering. Eur. J. Wood Prod. 69(2): 333-336
Sint, Κ.Μ., Militz, Η., Adamopoulos, S. and F. Hapla. 2011. Treatability and penetration indices of four lesser-used Myanmar hardwoods. Wood Research 56(1): 13-22
Adamopoulos, S., G. Koch. 2011. Wood structure and topochemistry of Juniperus excelsa. IAWA J. 32(1): 67-76
Scholz, G., Adamopoulos, S. and H. Militz. 2011. Migration of blue stain hyphae within wax treated wood. IAWA J. 32 (1): 88-96
Κακαράς Ι. και Μαντάνης Γ. (2010). Η εφαρμογή της σύγχρονης τεχνολογίας στη συντήρηση έργων τέχνης από ξύλο. Επιστημονική Επετηρίδα Σχολής Δασολογίας & ΦΠ Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης (τιμητικός τόμος στη μνήμη Καθ. Νικολάου Στάμου).
Adamopoulos, S., Chavenetidou, M., Passialis C. and E. Voulgaridis. 2010. Effect of cambium age and ring width on density and fibre length of black locust and chestnut wood. Wood Research 55(3): 25-36
Mantanis G., Karastergiou S., Barboutis I. (2010). Finger jointing of green Black pine wood (Pinus nigra L.). European Journal of Wood & Wood Products 69(1): 155-157.
Mantanis G.I., Birbilis, D. (2010). Physical and mechanical properties of Athel wood (Tamarix aphylla). Suleyman Demirel University (SDU) - Forestry Faculty Journal 2010; A(2): 82-87.
Mantanis G.I. and A. Papadopoulos (2010). Reducing the thickness swelling of wood-based panels by applying a nanotechnology compound. European Journal of Wood & Wood Products 68: 237-239.
Mantanis G.I., Adamopoulos S. and E. Rammou (2010). Physical and mechanical properties of Pinus leucodermis wood. Wood Material Science & Engineering 2010; 5 (1): 50-52.
Mantanis G.I. and A. Papadopoulos (2010). The sorption of water vapour of wood treated with a nanotechnology compound. Wood Science and Technology 44 (3): 515-522.
Adamopoulos, S., Passialis, C. and E. Voulgaridis. 2010. Ring width, latewood proportion and density relationships in black locust wood of different origin and clones. IAWA journal 31(2): 169-178
Adamopoulos, S. and C. Passialis. 2010. Relationship of the toughness and the modulus of elasticity in static bending of small clear spruce wood specimens. Eur. J. Wood Prod. 68(1): 109-111
Trigkas, M., Sideras, A., Ntalos, G. and I. Papadopoulos, 2009. Possibilities of Production and Use of Wood Pellets in Greece from an Economic and Market Aspect. Proceedings of 2nd International CEMEPE & SECOTOX Conference, Mykonos, June 21-26, 2009, ISBN 978-960-6865-09-01, pp 1973-1978.
Skarvelis M. and Kakaras I. 2009. Quality related problems on wood and wood products imported from Balkan countries: the Greek users point of view. EDG Drying Conference: Improvement of wood drying quality by conventional and advanced drying techniques. COST E53 Meeting, 21-23 April 2009, Bled, Slovenia.
Adamopoulos, S., Milios, E., Doganos, D., Bistinas, I. 2009. Ring width, latewood proportion and dry density in stems of Pinus brutia Ten. Eur. J. Wood Prod. 67(4): 471-477
Papadopoulos, I., Skarvelis, M. and Ntalos, G., 2009. Economic and Technical Aspects on Quality Control for Wood Products: The Case of Furniture Enterprises in Thessaly (Greece). Cost Action E53, Proceedings Conference 22nd – 23rd October 2009, Lisbon, Portugal, pp. 247-254.
Lykidis, C. and A. Grigoriou, 2009. Colour alterations in hydrothermally recycled particleboards. In Proceedings of “Adding Value through Physical Functionality”, Conference organised by COST Action E49. Istanbul, 29 April 2009, pp. 95-108.
Passialis, C., Voulgaridis, E., Adamopoulos, S., Matsouka, M. 2008. Extractives, acidity, buffering capacity, ash and inorganic elements of black locust wood and bark of different clones and origin. Holz als Roh- und Werkstoff 66(6): 395-400
Karastergiou S., Mantanis G.I. and K. Skoularakos (2008). Green gluing of oak wood (Quercus conferta L.) with a one-component polyurethane adhesive. Wood Material Science and Engineering 2008; 3-4: 79-82.
